Liquid Polymer Preparation Systems: Model 580
Acrison’s Model 580 Liquid Polymer Preparation Systems are designed with an extremely efficient, two-stage activation system that produces a precise, uniform and thoroughly activated solution.
The exclusive Model 580 “two-stage” activation system (the combination of Acrison’s unique and patented Polymer Dispersion-Injector and Motorized Activation Chamber) ensures both gentle handling of liquid polymer (without exposing the fragile, elongated polymer chains to damaging energy) and an exceptionally high level of mixing efficiency. Polymer short-circuiting and/or under-processed or over-processed polymer cannot occur.
Features/Benefits
- Unique Polymer Dispersion-Injector and highly efficient Static Activation Chamber – instantly activates and blends liquid polymer with water
- Versatile – will handle emulsions, dispersions, mannich solutions, and pre-wetted dry polymers type)
- Polymer Metering Pump – is easy priming, simple to operate, and capable of being paced by a 4-20mA signal
- Automatic Flush Cycle Upon Shut-Down
- Automatic Shut-Down on Loss of Water Pressure – prevents system from being operated under adverse conditions
Specifications
Standard Construction
- All product contact parts are stainless steel or synthetic material
- Operating pressure is 100 PSIG maximum and 20 PSIG minimum
- Operated by an Allen-Bradley Pico Programmable Controller. The control panel is NEMA 4X; power requirement is 115/1/60 VAC.
- Various model sizes – Smallest unit can be supplied with a 0.42 GPH pump. Largest unit includes a 15 GPH pump.
- Suction lift up to 39 inches (varies with pumping rate and polymer viscosity)
- Polymer viscosity up to 40,000 cps
Options
- Progressive cavity or gear type metering pump (flooded suction)
- Pump output calibration column package
- Wall shelf or floor stand
- Secondary dilution package
- Water supply strainer
- Water supply pressure reducing valve
- Process control interfacing capability
Liquid Polymer Preparation Module: Model 530
Acrison’s Model 530 Liquid Polymer Preparation Module is designed with a highly efficient, two-stage “motorless” activation system that produces a precise, uniform and thoroughly activated solution in an economical and compact package.
The exclusive Model 530 “two-stage” activation system (the combination of Acrison’s unique and patented Polymer Dispersion-Injector and Static Activation Chamber) ensures both gentle handling and the very efficient mixing of liquid polymers with water.
Features/Benefits
- Unique Polymer Dispersion - Injector and highly efficient Static Activation Chamber – instantly activates and blends liquid polymer with water
- Versatile – will handle emulsions, dispersions, mannich solutions, and pre-wetted dry polymers type)
- Polymer Metering Pump – is easy priming, simple to operate, and capable of being paced by a 4-20mA signal
- Automatic Flush Cycle Upon Shut-Down
- Automatic Shut-Down on Loss of Water Pressure – prevents system from being operated under adverse conditions
Specifications
Standard Construction
- All product contact parts are stainless steel or synthetic material
- Operating pressure is 100 PSIG maximum and 20 PSIG minimum
- Operated by an Allen-Bradley Pico Programmable Controller. The control panel is NEMA 4X; power requirement is 115/1/60 VAC.
- Various model sizes – Smallest unit can be supplied with a 0.42 GPH pump. Largest unit includes a 15 GPH pump.
- Suction lift up to 39 inches (varies with pumping rate and polymer viscosity)
- Polymer viscosity up to 40,000 cps
Options
- Progressive cavity or gear type metering pump (flooded suction)
- Pump output calibration column package
- Wall shelf or floor stand
- Secondary dilution package
- Water supply strainer
- Water supply pressure reducing valve
- Process control interfacing capability
